A container is equipment used to store contents for a short period of time, so for farmers with large herd of cattle they need to invest in these container fitted with cooling system to prevent their content from going bad. These containers exist in many type, there is single, triple and double walled containers, there is jacketed and lastly the insulated containers fitted with outdoor and indoor installation necessary to cool, store and heat liquids. To have your dairy products properly stored use milk tank and silo.
Dairy products need proper storage system because they are highly perishable products. Storage containers are designed to have conical or flat bottom mounted on flexible legs. Effective and proper insulation makes storage containers suitable for storing cream, milk and many other dairy products to keep them fresh.
Cooling facilities and more specifically the tanks are of two types. They are either the open tanks which store around one hundred and fifty to two hundred and fifty liters or closed facilities which accommodate large amount of milk around one thousand to ten thousand liters.
There are lacteal secretion silos which are so big and can take more than ten thousand liters suitable for large scale producers. They are designed to be strong and they are installed outside but should be adjacent or close to dairy, that is if all the controls and milk pipe outlet are situate or fitted installed in dairy.
The containers are constructed with two walls made of steel, the walls are some few inches apart from each other, and space in between them is filled with foam known as polyurethane. This foam is used to regulate the temperature from outside and inside the container.
Containers for storage and cooling are readily available in the market for those farmers who wish to buy them and have the require capital, for those farmers with inadequate capital to invest in these coolers, they can rent it and use then do the payment slowly through a monthly fee payment.
Milk has the ability to resist bacteria naturally immediately after milking, but it is only speedy cooling to bring down temperatures to around four degrees Celsius that enable it to further stop bacteria activities.
Direct expansion is one of the types for cooling, here a container is fitted with pipes carrying refrigerant which are attached to the outside chamber. Direct expansion cannot be carried out in the absence of content or lacteal secretion inside the container, in case it is done without, walls of the container will automatically freeze. The silo is quickly cooled as warm content flows in. The container is then cooled at a slow rate to maintain that low temperature.
There is supposed to be an outlet at the bottom of container and fitted with a valve. All cooling tanks have thermometer which allows for regular temperature inspection, some container have automatic systems of cleaning itself using hot water, cold water and an alkaline fluid used for cleaning.
Dairy products need proper storage system because they are highly perishable products. Storage containers are designed to have conical or flat bottom mounted on flexible legs. Effective and proper insulation makes storage containers suitable for storing cream, milk and many other dairy products to keep them fresh.
Cooling facilities and more specifically the tanks are of two types. They are either the open tanks which store around one hundred and fifty to two hundred and fifty liters or closed facilities which accommodate large amount of milk around one thousand to ten thousand liters.
There are lacteal secretion silos which are so big and can take more than ten thousand liters suitable for large scale producers. They are designed to be strong and they are installed outside but should be adjacent or close to dairy, that is if all the controls and milk pipe outlet are situate or fitted installed in dairy.
The containers are constructed with two walls made of steel, the walls are some few inches apart from each other, and space in between them is filled with foam known as polyurethane. This foam is used to regulate the temperature from outside and inside the container.
Containers for storage and cooling are readily available in the market for those farmers who wish to buy them and have the require capital, for those farmers with inadequate capital to invest in these coolers, they can rent it and use then do the payment slowly through a monthly fee payment.
Milk has the ability to resist bacteria naturally immediately after milking, but it is only speedy cooling to bring down temperatures to around four degrees Celsius that enable it to further stop bacteria activities.
Direct expansion is one of the types for cooling, here a container is fitted with pipes carrying refrigerant which are attached to the outside chamber. Direct expansion cannot be carried out in the absence of content or lacteal secretion inside the container, in case it is done without, walls of the container will automatically freeze. The silo is quickly cooled as warm content flows in. The container is then cooled at a slow rate to maintain that low temperature.
There is supposed to be an outlet at the bottom of container and fitted with a valve. All cooling tanks have thermometer which allows for regular temperature inspection, some container have automatic systems of cleaning itself using hot water, cold water and an alkaline fluid used for cleaning.
Comments
Post a Comment